To get a flatter response, you could increase the size of the enclosure but the overall response wouldn't be perfectly flat. If you listen to all types of music, you'd likely want an enclosure that would give a flatter response. If you listen to those types of music, this system may perform satisfactorily. This will give you good results for rap or other bass heavy music. Many manufacturers recommend an enclosure that's going to give you a peak like we mentioned earlier. You could design a system that would produce the desired SPL at all frequencies but it would require significantly more power and speakers than the aforementioned system with the narrow peak. It would, however, leave you with a system that would have less than perfect frequency response and marginal performance at the low frequency end of the spectrum. This would allow you to generate the desired SPL and properly impress your friends. If you want a system to produce a lot of SPL (but have limited power or number of speakers), you'll probably have to concentrate a lot of the acoustic energy within a small band of frequencies. Many people don't realize that, unless you have virtually unlimited resources, there are going to be trade offs when designing a system. It will attempt to help you get what you want from your audio system and your subwoofer in particular. This page will touch on a few new topics (all of which are covered in detail on upcoming pages).

It's not quite as simple as Ruffle but anyone even moderately familiar with the Windows Control Panel and installation of software can use Flash as it was intended. More information on Flash capable browsers can be found HERE.

An alternative to Ruffle for viewing Flash content is to use an alternative browser like the older, portable version of Chrome (chromium), an older version of Safari for Windows or one of several other browsers.

6x9 car speaker enclosure design